ZhuHai Lead-HD Technology Co.,Ltd
嶄猟井 English
Production Capacity
PCB Production Capacity
PCB Production Equipment
FPC Production Capacity
FPC Production Equipment
Process Flow Chart
Environmental Systems
PCB Production Capacity
Home > Production Capacity > PCB Production Capacity
Production Cycle
Item Double Side Multilayer
Sample 10days 15days
New Order 15days 25days
Repeat Order 12days 20days

Item Specification Remarks
 Number of Layer  1~14  
 Material  CEM-3,FR-4,HTg halogen free  Free
 Finish Board Thickness  0.2mm~3.20mm (8mil~126mil)  
 Minimum Core Thickness  0.1mm (4mil)  
 Copper Thickness  1/2 oz min. 3 oz max.  
 Min. Trace Width & Line Spacing  0.075mm (3mil)  Flash gold
 Min.Hole Diameter CNC Drilling  0.3mm(12mil) 0.25mm(10mil)  
 Min.Hole Diameter Punching  0.9mm (35mil)  
 Dimension Tolerance  Hole Position  +/-0.075mm(3mil) CNC Drilling  
 遙h Conductor Width(W)  +/-0.05mm(2mil)or +/-20% of original artwork  
 Hole Diameter(H)  PTH+/-0.075mm (3mil)Non-PTH+/-0.05mm(2mil)  
 Outline Tolerance

 +/-0.15mm (6mil)by CNC Routing
  +/-0.10mm (4mil)by punching

 Warp & Twist  0.70%  
 Surface Treatment on Land Area  Nickel/Gold Plating/Entek/Hot Air Leveling/Immersionsilver/ENIG  
 Insulation Resistance  10K ohm ~ 20M ohm  
 Conductivity  <50 ohm  
 Test Voltage  300V  
 V-cutting  Panel Size  110X100mm (min.) 660X600mm (max.)  
 Board Thickness  0.6mm (24mil)min. ~3.2mm (125mil)max.  
 Remain Thickness  0.3mm (12mil)min.  
 Tolerance  +/-0.1mm (4mil)  
 Groove Width  0.50mm (20mil)max.  
 Groove to Groove  10mm min.  

 Groove to Trace

 0.50mm (20mil)min.  
 Slot  Slot size tol. > = 2W  PTH L: +/-0.15mm (6mil) W:+/-0.1mm (4mil)  Where:L=Slot length
  W=Slot width Min.drill
  bit size for multi-drill is 0.7mm
 NPTH L: +/-0.125mm (5mil) W:+/-0.1mm (4mil)
 Minimum spacing between hole edge to circuitry pattern  PTH Hole: 0.13mm (5mil)  
 NPTH Hole: 0.18mm (7mil)
 Registration Tolerance
  of Front/Back image
Front image vs back image  0.075mm (3mil)  
 Multilayers Layer-layer misregistration  4 layers: 0.15mm (6mil)max.  
 6 layers: 0.25mm (10mil)max.  
 Min.spacing between hole
  edge to circuitry pattern of an inner layer
 0.25mm (10mil)  
 Min.spacing between
  board outline to circuitry pattern of an inner layer
 0.25mm (10mil)  
  Board thickness tolerance
 4 layers:+/-0.13mm (5mil)  
 6 layers:+/-0.15mm (6mil)

  Impedance Control
 60 ohm+/-10%  
Copyright Notice © ZhuHai Lead-HD Technology Co.,Ltd. All rights reserved.